T-Shaped MIMO Antenna Design with Defected Ground Structure and Parasitic Elements for 5G Application

Article Sidebar

PDF
Published Jan 27, 2025
DOI https://doi.org/10.20895/jtece.v7i1.1618

Main Article Content

Ayu Mika Sherila
UPN Veteran Jakarta
Umaisaroh Umaisaroh
Universitas Mercu Buana
Mudrik Alaydrus
Universitas Mercu Buana

Abstract

5G technology is designed to improve efficiency, network capacity, data rate, and coverage with low power consumption. This requires the design of suitable antennas for 5G wireless communications to achieve optimal bandwidth, radiation, efficiency, and performance. MIMO antenna designs use multiple antennas and face the main challenge of reducing mutual coupling between adjacent antenna elements. In this study, the MIMO antenna is designed using T-shaped DGS Technique and parasitic elements. The DGS technique is developed by creating a specific area on the ground plane of the antenna to improve its performance. By incorporating DGS concepts and parasitic elements into the design, the aim is to achieve large bandwidth and high gain. This antenna has dimensions of 52 mm x 12 mm and is simulated using Ansys HFSS software. Measurement results for the antenna using Rogers Duroid RT5880 substrate show a mutual coupling value of -54.2 dB, return loss of -11.1 dB, gain of 13.11 dB, and a sufficiently wide bandwidth. Thus, the proposed antenna can operate at a frequency of 28 GHz, meeting the requirements for 5G applications.

Article Details

How to Cite
Sherila, A., Umaisaroh, U., & Alaydrus, M. (2025). T-Shaped MIMO Antenna Design with Defected Ground Structure and Parasitic Elements for 5G Application. Journal of Telecommunication Electronics and Control Engineering (JTECE), 7(1), 64-76. https://doi.org/10.20895/jtece.v7i1.1618
Issue
Vol 7 No 1 (2025): Journal of Telecommunication, Electronics, and Control Engineering (JTECE)
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

References

[1] U. Ullah, I. Ben Mabrouk, S. Koziel, M. Al-Hasan and R. Shubair. "An Ultra-Wideband Circularly Polarized Multiple-Input Multiple-Output Antenna with Polarization Diversity," 2019 International Conference on Electrical and Computing Technologies and Applications (ICECTA). 2019. pp. 1-3, doi: 10.1109/ICECTA48151.2019.8959558.
[2] Zhang, Y. M., & Zhang, S. A Side-Loaded-Metal Decoupling Method for 2× N Patch Antenna Arrays. IEEE Antennas and Wireless Propagation Letters, 2021. 20(5), 668-672.
[3] Nadeem, I., & Choi, D. Y. Study on mutual coupling reduction technique for MIMO antennas. IEEE Access, 2019. 7, 563-586.
[4] Chen, X., Zhang, S., & Li, Q. A review of mutual coupling in MIMO systems. IEEE Access, 2018. 6, 24706-24719.
[5] Koesmarijanto, K., Alifia, N. A. P., & Darmono, H. Design and Implementation of 2x4 Element Hexagonal Array Microstrip Antenna with DGS Method in the Shape of Dumbbell Circle Head for 2.4 GHz Frequency Wi-Fi Applications. Journal of Telecommunication Network (Jurnal Jaringan Telekomunikasi), 2022. 12(4), 232-238.
[6] Khandelwal, M. K., Kanaujia, B. K., & Kumar, S. Defected ground structure: fundamentals, analysis, and applications in modern wireless trends. International Journal of Antennas and Propagation, 2017(1), 2018527.
[7] Rao, P. K., Chaurasia, R., Verma, R., Gupta, H., Pathak, S., & Mishra, R. T–Shape MIMO Antenna with Parasitic Element and DGS for 5G Applications. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 2021. 13(3), 7-11.
[8] Jetti, C. R., & Nandanavanam, V. R. Trident-shape strip loaded dual band-notched UWB MIMO antenna for portable device applications. AEU-International Journal of Electronics and Communications, 83, 2018. 11-21.
[9] Gupta, A. K., Patnaik, A. K., Suresh, S., Chowdary, P. S. R., & Krishna, M. V. DGS-Based T-Shaped Patch Antenna for 5G Communication Applications. In Microelectronics, Electromagnetics and Telecommunications, 2021. (pp. 11-19). Springer, Singapore.
[10] Singh, S. V., Pratap, J., Singh, A., Sharma, S., & Gupta, S. Isolation Enhancement of MIMO Antenna for Millimeter wave Applications. In 2021 2nd International Conference on Intelligent Engineering and Management (ICIEM), 2021. (pp. 466-470). IEEE.
[11] Hakim, M. L., Uddin, M. J., & Hoque, M. J. 28/38 GHz Dual-Band Microstrip Patch Antenna with DGS and Stub-Slot Configurations and Its 2× 2 MIMO Antenna Design for 5G Wireless Communication. In 2020 IEEE Region 10 Symposium (TENSYMP), 2020. (pp. 56-59). IEEE.
[12] Preethi, V., Swamalatha, P., Rajpoot, V., Krishna, R. V. V., & Kumar, S. Design and Implementation of Circular Microstrip Patch Array Antenna for 5G Communication Using Rogers RT5880. In 2023 International Conference on Advanced & Global Engineering Challenges (AGEC), 2023. (pp. 32-37). IEEE.
[13] L. Ammai, R. Anwar, and D. A. Nurmantris. “Analysis on multi rings defected ground structure for microstrip antenna miniaturization,” in 2017 International Conference on Engineering Technology and Technopreneurship (ICE2T). IEEE, 2017, pp. 1–4.
[14] Ping Dong, Tao Zheng, Shui Yu, Hongke Zhang and XiaoyunYan. Enhancing Vehicular Communication Using 5Genabled Smart CollaborativeNetworking. IEEE Wireless Communications, 24(6), 2017. 72-79.
[15] P. K. Rao and R. Mishra. Multi Band Antenna with Multi Band Notch 2.5/3.7/6.4/8.1/12.4/14.4GHz Characteristics. 5th IEEE Uttar Pradesh Section International Conference on Electrical, Electronics and Computer Engineering (UPCON), Gorakhpur, 2018, pp. 1-5, doi: 10.1109/UPCON.2018.8596938
[16] Khattak, R. Y., Shoaib, S., Shah, R. A., & Hussain, A. Design and Performance Investigation of Array Antenna for 60 GHz WiGig Terminals. In 2021 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (ElConRus), 2021. pp. 2521-2524.
[17] A. Ghalib and M. S. Sharawi, "TCM Analysis of Defected Ground Structures for MIMO Antenna Designs in Mobile Terminals," in IEEE Access, vol. 5, 2017. pp. 19680-19692, doi: 10.1109/ACCESS.2017.2739419.